Recover Data from RAID


  • Software to get back data from RAID partitions:

    RAID is a short form of Redundant Array of Independent Disks. RAID is a technique of organizing several hard disk drives into a larger logical disk for better performance and data availability. The majority of small to medium businesses around the world have turned to RAID configured systems for their storage solutions. The important reason for using RAID arrays in business is that RAID offers highly fault tolerant and cost effective maintenance. There are several levels of RAID available such as RAID 0, RAID 1, RAID 3, RAID 5, RAID 6, 10 etc, where each level offers various benefits in terms of data availability, cost and performance.

    Advantages of using RAID technology:

    • RAID drives provide fault tolerance that is the ability of the system to continue to perform functions/working even when one or more hard disk drives fail.
    • Has higher protection against data loss than a single hard drive
    • Multiple disks work together to increase the overall system performance.
    • In spite of all high system performance, it also brings difficulties to its users. For an instance, you may find it intricate to resize or move partitions in these RAID drives. RAID drives may fail and you face data loss from RAID partitions due to system crash, firmware errors, component malfunction, etc. Data on RAID drives remain unusable or corrupted in most cases. Considering the value of data, the importance of quick and secure recovery,  you need to take the help of a professional data recovery tool. Here is a competent partition data recovery utility that rescues and recovers the huge amount of data from RAID drives preventing it from permanent data loss. This tool is designed with powerful algorithms to scan and recover lost data from RAID 0, RAID 1 and RAID 5 partitions on both Windows and Mac OS after after accidental deletion or formatting. This tool can also successfully restore partition on Windows 7, Windows XP, Windows Vista operating systems an unexpected data scenario takes place on the hard drive.

      What to do after a loss of data from RAID:

      If you have lost data from RAID or experienced a RAID failure, then do not try to regenerate your strip or rebuild the RAID array. Anything that is done to the RAID array after data loss can greatly decrease ability to restore data from the RAID. Also it might lead to permanent loss of data when lost data is overwritten on RAID drives.

      Data might be lost from RAID drives due to any of the below listed reasons:.

      • Mistakenly deleting, formatting or reformatting partitions on RAID hard drives is the most common cause for the loss of data.
      • Data from RAID partitions can be lost while resizing or altering the partition size in Windows Disk Manager or other disk management utilities.
      • In the event of hard crash, operating system might attempt to fix a RAID disk, this can destroy RAID pattern and leads to disk corruption resulting in data loss.
      • Interruption or errors such as power failures, system shutdown, etc during conversion of file system of a partition from one to another can bring about severe data loss.
      • Usually partition table stores all vital information related to partitions and its data. By chance the partition table gets corrupted due to MBR or boot sector damage, it makes data on RAID partitions inaccessible and causes data loss. Moreover, employ this simple user interface to restore files from partitioned hard drive with great ease. For more information, click here http://www.mypartitionrecovery.com/partitioned-hard-drive.html.
      • Harmful virus attacks, software malfunction, OS crash, hardware failures, OS re-installation errors and other reasons for loss of data from RAID partitions.

      Software to retrieve data from RAID partition

      Don’t panic, when you have lost data files from RAID partitions due to above mentioned scenarios, just download and install the trial version of partition data recovery software on your PC having Windows OS. Connect the affected RAID drive as external storage device and follow few simple steps as shown by its user interface to complete data recovery from RAID partition. Unless and until the files are not overwritten on RAID drive, you can be 100% sure to get back lost files. View the list of restored files and measure the performance of this partition data recovery utility. You can employ this application to execute partition recovery from external hard drive and hard drives of various brands like Hitachi, Western Digital, Seagate, Iomega, Toshiba, Samsung, Maxtor, etc.

      This tool has potential to get back around 280 file types lost or deleted from partitions on different storage drives. Other than hard drives, you can also recover partition on USB flash drive after deletion or loss with its data. It will enable you to retrieve missing partitions after re-partitioning hard drive, formatting or reformatting hard drive partitions on Windows OS. You perform data recovery from FAT16, FAT32, NTFS, NTFS5 and ExFAT formatted partitions on hard drive using this partition recovery software. Apart from Windows, you can carry out lost volume recovery from Mac machines installed with any of Mac OS X Leopard, Snow leopard and Lion operating systems.

      Steps to recover data from RAID partition on Windows computer are:

      Step 1:Download and install the demo version of partition data recovery software on your Windows PC. Launch it from the desktop icon or from Start Menu. A welcome window appears with three options. Select "Recover Partitions / Drives" and since we have to recover data from RAID partition click on "Partition Recovery" from the next display screen as shown in Figure a.

      Recover Data from RAID - Recover partitions or drive screen

      Figure a: Recover Partitions / Drives

      Step 2: Software will display the list of available drives. Select the RAID drive from which you want to recover the partition data and click "Next". Now a list of deleted or lost partition will display as shown in Figure b. Select the partition from which you want to recover data and click "Next".

      Recover Data from RAID - Select deleted partition - screen

      Figure b: Select RAID Partition

      Step 3: Software will display the list of file types. Select the type of files which you want to recover and click "Next". Now the scanning process starts. Once the scanning of RAID drive completes, a list of recovered files will be displayed as shown in Figure c. Select the file using "Data View" and click on "Preview" button to preview the recovered files. If you are satisfied with the recovered results, buy the full version and save your recovered files.

      Recover Data from RAID - List of recovered data

      Figure c: Data View / File Trpe View

Mein Partition Erholung | La Mio Partizione Recupero | Mi Partición Recuperación | Mi Partición Recuperación | Minha Partição de Recuperação | Min Partitioner Inddrivelse | 我的分区恢复 | マイ·パーティションの回復 | 나의 파티션 복구 | Mijn Tussenschot Herstel

For Leopard (10.5) and
Snow Leopard (10.6) Users

For Lion (10.7), Mountain Lion (10.8),
Mavericks & Yosemite(10.10) Users